Operating Specifications* | |
|---|---|
| Analysis Modes | NPOC, TOC, (TC-IC), TC, IC |
| Range | 0.05 to 50,000 ppm TOC |
| Precision | RSD ≤3% of reading at >5 ppm NPOC or TOC |
| Accuracy | Greater of ±3% or ±.25 ppm, 1 to 100 ppm, NPOC or TOC |
| Linearity | R2 ≥ 0.995, measured as NPOC |
| LOD | <50ppb |
| TOC Calibration Stability | Up to 6 months |
| Analysis Time | 2.6 to 8.3 minutes |
| Particle Diameters in Sample | ≤800 µm diameter |
| Sample Temperature | 10-60 °C (41-140 °F) |
| Ambient Temperature Range | 10 to 40 °C (50-104 °F) |
| Sampling | Ambient pressure, 0.08 to 2.82 mL sample volume per analysis |
Analyzer Specifications | |
| Sample Capacity | Up to 120 with optional Autosampler** (or single standard vial port) |
| Outputs | Ethernet Port (1); USB Ports (3) |
| Display | Color LCD w/touch-screen |
| Power | 100 – 240 ± 10% VAC, 50 – 60 Hz, 400 VA |
| Installation/Overvoltage Category | II |
| Dimensions | H: 52.05 cm (20.5 in.); W: 32.26 cm (12.7 in.); D:58.42 cm (23.0 in) |
| Dimensions (Autosampler) | H: 52.2 cm (20.5 in.); W: 31.1 cm (12.25 in.); D: 53.3 cm (21.0 in.) |
| Weight | 22.41 kg (49.4 lb); 14.1 kg (31.1 lb) for optional Autosampler |
| Safety Certifications | CE, ETL listed. Conforms to UL Std. 61010-1. Certified to CSA C22.2 NO. 61010-1 |
Environment | |
| Maximum Relative Humidity | Up to 95%, non-condensing |
| Normal Operating | Indoor use only. Keep instrument and reagents out of direct sunlight. |
| Maximum Altitude | 3,000 m (9,800 ft) |
| Pollution Degree | 2 |
* Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.
** Up to 63 sample tubes for 40mL and 60mL vials. Up to 120 sample tubes for 35mL vials.
*** NPOC mode, bottled N2 as carrier gas. This performance is achieved under controlled conditions where variables that influence low-level performance have been minimized or eliminated. This performance may not be achievable on instruments delivered before August 2016.
新型的 InnovOx 線上型總有機碳 (TOC) 分析儀代表了高濃度總有機碳 (TOC) 測量技術和可靠性的真正的技術突破。InnovOx (「氧化技術創新」的英文縮寫) 分析儀具有超長的系統有效執行時間，可以連續監測數千種常見樣品，以及鹽水和纖維素等難以氧化的樣品。InnovOx 總有機碳 (TOC) 分析儀提供無與倫比的氧化過程耐用性、0.5 至 50,000 ppm 的動態線性工作範圍、6 個月的校準曲線穩定性、使用者可配置的警報和輸出、以及直觀的彩色觸摸顯示幕。
InnovOx分析儀非常容易安裝、操作和維護，而且價格低廉。在通常情況下，它可以運行 30 天而無需更換試劑。InnovOx 線上型分析儀還具有極廣的用途，其多樣品流路測量功能使使用者可以用一台儀器同時運行多達 5 個樣品流路。
Sievers InnovOx (「氧化技術創新」的英文縮寫) 實驗室型和線上型總有機碳 (TOC) 分析儀採用基於超臨界水氧化 (SCWO) 的總有機碳 (TOC) 測量新技術。此技術將密封反應器模組中的樣品水加熱到 375℃，將反應器模組中的壓力提高到 3200 psi，從而使水到達超臨界狀態。在此情況下，水既非氣體也非液體，卻兼具兩者的優點。無論對於水中的有機化合物還是其它的雜質來說，超臨界水氧化技術使 InnovOx 分析儀達到 99％ 以上的氧化效果，從而達到更高的總有機碳 (TOC) 測量準確度和精度。這種創新的超臨界水氧化過程還可以去除分析運行間隔中殘留的氧化副產物和樣品污染，從而使分析儀無需進行頻繁的維護工作，無需更換昂貴的部件。
