商店 » 應用類型 » 環境檢測 » 環境檢測 ‧ VEOLIA » SIEVERS InnovOx 實驗室型總有機碳 (TOC) 分析儀
Operating Specifications* | |
|---|---|
| Analysis Modes | NPOC, TOC, (TC-IC), TC, IC |
| Range | 0.05 to 50,000 ppm TOC |
| Precision | RSD ≤3% of reading at >5 ppm NPOC or TOC |
| Accuracy | Greater of ±3% or ±.25 ppm, 1 to 100 ppm, NPOC or TOC |
| Linearity | R2 ≥ 0.995, measured as NPOC |
| LOD | <50ppb |
| TOC Calibration Stability | Up to 6 months |
| Analysis Time | 2.6 to 8.3 minutes |
| Particle Diameters in Sample | ≤800 µm diameter |
| Sample Temperature | 10-60 °C (41-140 °F) |
| Ambient Temperature Range | 10 to 40 °C (50-104 °F) |
| Sampling | Ambient pressure, 0.08 to 2.82 mL sample volume per analysis |
Analyzer Specifications | |
| Sample Capacity | Up to 120 with optional Autosampler** (or single standard vial port) |
| Outputs | Ethernet Port (1); USB Ports (3) |
| Display | Color LCD w/touch-screen |
| Power | 100 – 240 ± 10% VAC, 50 – 60 Hz, 400 VA |
| Installation/Overvoltage Category | II |
| Dimensions | H: 52.05 cm (20.5 in.); W: 32.26 cm (12.7 in.); D:58.42 cm (23.0 in) |
| Dimensions (Autosampler) | H: 52.2 cm (20.5 in.); W: 31.1 cm (12.25 in.); D: 53.3 cm (21.0 in.) |
| Weight | 22.41 kg (49.4 lb); 14.1 kg (31.1 lb) for optional Autosampler |
| Safety Certifications | CE, ETL listed. Conforms to UL Std. 61010-1. Certified to CSA C22.2 NO. 61010-1 |
Environment | |
| Maximum Relative Humidity | Up to 95%, non-condensing |
| Normal Operating | Indoor use only. Keep instrument and reagents out of direct sunlight. |
| Maximum Altitude | 3,000 m (9,800 ft) |
| Pollution Degree | 2 |
* Stated analytical performance is achievable under controlled laboratory conditions that minimize operator and standards errors.
** Up to 63 sample tubes for 40mL and 60mL vials. Up to 120 sample tubes for 35mL vials.
*** NPOC mode, bottled N2 as carrier gas. This performance is achieved under controlled conditions where variables that influence low-level performance have been minimized or eliminated. This performance may not be achievable on instruments delivered before August 2016

Sievers InnovOx 可以用於工業過程水樣,環境樣品和廢水的 TOC 分析;並具有很高的準確度和精確度,較寬 TOC 動態測試範圍 (0.5 ppm 到 50,000 ppm) 和多種分析模式:TC (總碳),TIC (總無機碳),TOC (總有機碳) 和 NPOC (不可吹除有機碳)。
Sievers InnovOx 配有乙太網,直觀的彩色觸摸液晶顯示幕和 3 個 USB 介面。通過網路流覽器可以非常簡易對儀器進行遠端控制,提供的 USB 介面又非常方便於資料傳輸。與 Sievers 其他 TOC 分析儀一樣,Sievers InnovOx 具有易用、易操作和容易維修等特點。
Sievers InnovOx 可以用於廢水、環境樣品和大部分工業過程水樣品的分析, 包括: